Three Layer Co-Extrusion Blown Film Machine
A 3‑layer co‑extrusion blown film line designed for manufacturers who need stable output, uniform thickness, and faster material changeovers—enabled by Matila’s optimized die flow‑channel design for more even material distribution and more consistent film quality.
Watch videos (open in a new tab):
Key outcomes (USP):
- More consistent thickness via more uniform material distribution through the die.
- Stable long‑run production with fewer frequent adjustments.
- Faster changeovers to reduce downtime and labor effort.
Specification
| Items/Models | TL3/222/500 | TL3/232/650 | TL3/333/800 | TL3/343/1100 | TL3/444/1100 | TL3/454/1500 | TL3/555/1500 | TL3/565/1500 | TL3/565/2000 | TL3/666/2000 | TL3/666/2500 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Screw Diameter (mm) | 25 x 3 | 25x2 + 35 | 35x3 | 35x2 + 45 | 45 x 3 | 45x2 + 55 | 55 x 3 | 55 x 2 + 65 | 55 x 2 + 65 | 65 x 3 | 65 x 3 |
| Film Width (mm) | 250-400 | 300-550 | 400-700 | 600-1000 | 600-1000 | 800-1350 | 800-1350 | 800-1350 | 1200-1800 | 1200-1800 | 1500-2300 |
| Output (kg/hr) | 10-25 | 15-40 | 30-65 | 40-80 | 55 -110 | 60-130 | 100-200 | 110-240 | 110-260 | 140-280 | 140-300 |
| Film Thickness (mm) | 0.02-0.15, depending on the material & film size | 0.02-0.15, depending on the material & film size | |||||||||
| Main Motor (HP) | 5 x 3 | 5x2 + 10 | 10x3 | 10x2 + 20 | 20 x 3 | 20x2+30 | 30x3 | 30x2 + 50 | 30x2 + 50 | 50x3 | 50x3 |
| Items/Models | TL3/686/2000 | TL3/686/2500 | TL3/818/3000 | TL3/818/3500 | TL3/818/4000 | TL3/888/2500 |
|---|---|---|---|---|---|---|
| Screw Diameter (mm) | 65x2 + 80 | 65x2 + 80 | 80 x2 + 100 | 80 x2 + 100 | 80 x2 + 100 | 80x3 |
| Film Width (mm) | 1200-1800 | 1500-2300 | 2000-2800 | 2500-3300 | 3000-3800 | 1500-2300 |
| Output (kg/hr) | 170-340 | 180-360 | 260-520 | 290-580 | 290-580 | 220-440 |
| Film Thickness (mm) | 0.035 - 0.15, depending on the material & film size | |||||
| Main Motor (HP) | 50x2 + 75 | 50x2 + 75 | 75 x 2+100 | 75 x 2+100 | 75 x 2+100 | 75x3 |
| Items/Models | TL3/888/3000 | TL3/111/3000 | TL3/111/3500 | TL3/111/4000 | TL3/111/4500 | TL3/121/3000 | TL3/121/3500 | TL3/121/4000 | TL3/121/4500 | TL3/121/5000 |
|---|---|---|---|---|---|---|---|---|---|---|
| Screw Diameter (mm) | 80x3 | 100x3 | 100x3 | 100x3 | 100x3 | 100x2 + 120 | 100x2 + 120 | 100x2 + 120 | 100x2 + 120 | 100x2 + 120 |
| Film Width (mm) | 2000-2800 | 2000-2800 | 2500-3300 | 3000-3800 | 3500-4300 | 2000-2800 | 2500-3300 | 3000-3800 | 3500-4300 | 4000-4800 |
| Output (kg/hr) | 240-480 | 330-660 | 360-720 | 360-720 | 360-720 | 350-700 | 400-750 | 400-820 | 400-820 | 400-820 |
| Film Thickness (mm) | 0.04 - 0.15, depending on the material & film size | |||||||||
| Main Motor (HP) | 75x3 | 100x3 | 100x3 | 100x3 | 100x3 | 100x2 + 150 | 100x2 + 150 | 100x2 + 150 | 100x2 + 150 | 100x2 + 150 |
Optional Devices
(Placeholder) List the optional devices your CMS tab supports.
- Automation / control options (confirm by workflow)
- Thickness variation / rotary die or oscillating haul-off options (if applicable)
- Winding / handling options
- Other line configuration options
Tip: Optional devices are best presented as options + outcomes (what problem it solves), not only as part numbers.
Applications
Use this section to quickly confirm whether CT‑TL3 fits your target film product. Final suitability depends on film width, thickness range, material combination and required automation.
Typical applications
- Agricultural film: greenhouse film, mulch film, general-purpose farm film
- Packaging / printing film: packaging film, printing base film, lamination base film
- Lamination structures: converter-oriented structures where layer functions are planned by performance needs
- General protective film: protective / industrial film (confirm by product requirements)
3‑layer structure ideas (ABC)
- A (outer layer): printability / slip / anti‑block / weather resistance
- B (core layer): stiffness / strength / cost efficiency
- C (inner layer): sealing / toughness / puncture resistance
Final material selection depends on end‑use requirements and local supply. Share your target properties and we’ll recommend a structure.
Selection checklist (for configuration & quotation)
- Film application / end product
- Film width (mm)
- Thickness range (μm)
- Target output (kg/hr)
- Material combination (if known) + target film properties
- Winding / handling requirements
- Automation level
- Installation location / timeline
FAQ
Quick answers to common pre‑inquiry questions.
CT‑TL3 output depends on configuration (film width, thickness range, materials and application). Share your target output and film specs and Matila will recommend the suitable setup.
Thickness uniformity is influenced by materials, die design, cooling and process settings. CT‑TL3 focuses on stable operation and optimized material flow to support consistent thickness in long runs.
Yes—3‑layer structures allow different materials/functions in each layer depending on end‑product requirements. Share your target film performance and material preference for recommended combinations.
CT‑TL3 is commonly planned for agricultural film, packaging/printing film and lamination structures. Final suitability depends on width, thickness and performance targets.
Die flow distribution affects thickness uniformity and long‑run stability. CT‑TL3 emphasizes optimized die flow‑channel design to support more even material distribution and more consistent film quality.
CT‑TL3 can be planned with automation‑ready options based on your workflow and production needs. Contact Matila to confirm the recommended option set.
Film application, film width, thickness range, target output (kg/hr), material combination (if known), desired automation level, and installation location/timeline.
Yes. Provide your product mix and targets (output, thickness, materials). Matila can propose a configuration plan and discuss expected performance and options.
Specification
| Items/Models | TL3/222/500 | TL3/232/650 | TL3/333/800 | TL3/343/1100 | TL3/444/1100 | TL3/454/1500 | TL3/555/1500 | TL3/565/1500 | TL3/565/2000 | TL3/666/2000 | TL3/666/2500 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Screw Diameter (mm) | 25 x 3 | 25x2 + 35 | 35x3 | 35x2 + 45 | 45 x 3 | 45x2 + 55 | 55 x 3 | 55 x 2 + 65 | 55 x 2 + 65 | 65 x 3 | 65 x 3 |
| Film Width (mm) | 250-400 | 300-550 | 400-700 | 600-1000 | 600-1000 | 800-1350 | 800-1350 | 800-1350 | 1200-1800 | 1200-1800 | 1500-2300 |
| Output (kg/hr) | 10-25 | 15-40 | 30-65 | 40-80 | 55 -110 | 60-130 | 100-200 | 110-240 | 110-260 | 140-280 | 140-300 |
| Film Thickness (mm) | 0.02-0.15, depending on the material & film size | 0.02-0.15, depending on the material & film size | |||||||||
| Main Motor (HP) | 5 x 3 | 5x2 + 10 | 10x3 | 10x2 + 20 | 20 x 3 | 20x2+30 | 30x3 | 30x2 + 50 | 30x2 + 50 | 50x3 | 50x3 |
| Items/Models | TL3/686/2000 | TL3/686/2500 | TL3/818/3000 | TL3/818/3500 | TL3/818/4000 | TL3/888/2500 |
|---|---|---|---|---|---|---|
| Screw Diameter (mm) | 65x2 + 80 | 65x2 + 80 | 80 x2 + 100 | 80 x2 + 100 | 80 x2 + 100 | 80x3 |
| Film Width (mm) | 1200-1800 | 1500-2300 | 2000-2800 | 2500-3300 | 3000-3800 | 1500-2300 |
| Output (kg/hr) | 170-340 | 180-360 | 260-520 | 290-580 | 290-580 | 220-440 |
| Film Thickness (mm) | 0.035 - 0.15, depending on the material & film size | |||||
| Main Motor (HP) | 50x2 + 75 | 50x2 + 75 | 75 x 2+100 | 75 x 2+100 | 75 x 2+100 | 75x3 |
| Items/Models | TL3/888/3000 | TL3/111/3000 | TL3/111/3500 | TL3/111/4000 | TL3/111/4500 | TL3/121/3000 | TL3/121/3500 | TL3/121/4000 | TL3/121/4500 | TL3/121/5000 |
|---|---|---|---|---|---|---|---|---|---|---|
| Screw Diameter (mm) | 80x3 | 100x3 | 100x3 | 100x3 | 100x3 | 100x2 + 120 | 100x2 + 120 | 100x2 + 120 | 100x2 + 120 | 100x2 + 120 |
| Film Width (mm) | 2000-2800 | 2000-2800 | 2500-3300 | 3000-3800 | 3500-4300 | 2000-2800 | 2500-3300 | 3000-3800 | 3500-4300 | 4000-4800 |
| Output (kg/hr) | 240-480 | 330-660 | 360-720 | 360-720 | 360-720 | 350-700 | 400-750 | 400-820 | 400-820 | 400-820 |
| Film Thickness (mm) | 0.04 - 0.15, depending on the material & film size | |||||||||
| Main Motor (HP) | 75x3 | 100x3 | 100x3 | 100x3 | 100x3 | 100x2 + 150 | 100x2 + 150 | 100x2 + 150 | 100x2 + 150 | 100x2 + 150 |
